18ft / 5.5m Nautflex Control Cable

Compatible with Genunie Johnson / Evinrude / OMC / BRP Cables CCX20518

Our control cables are located in Sydney Australia and ready for speedy 24hr dispatch.

For a smooth and easy operation of gear shift and throttle control. Suitable for all Johnson Evinurde motors after 1979+. They are also compatible with Genunie Johnson / Evinrude control cables part# CCX205++. These cables are made of stainless steel lubri-core solid wire construction and manufactured to exceed engine makers specifications. Durable UV resistant, Polyethylene outers resist abrasion to withstand the effects of saltwater, chemicals, petrol & oils.

The cables are black just make sure you check the ends of your cable match what is in the pictures.

The cable length is 18FT / 5.5m.  
To determine the length of replacement cable needed, measure from tip to tip and round off to next whole foot.

Features:

• Length: 18ft / 5.5m
• 1 Cable per box
• Nominal 75mm travel.
• Stainless steel core wire.
• End fittings: Brass ends with plating
• 150mm minimum bend radius.
• Fits directly into OMC Johnson Evinrude 1979 later control Boxes.
• Wire strand reinforced outer jacket. Outside diameter - 6.7mm.
• Compatible with Johnson / Evinrude models 1979 and later only. Part# CCX205++
• Suits stern drives, inboards and outboards.

WHY BUY FROM US?

This is why, See Below

Please take care when measuring for cable length. If you have ordered the wrong size cable we are happy to exchange for the correct size (if in stock) As long as the cables are sent back to us in the same condition including the packaging as we sent it to you. So dont rip or destroy the box until you know you have the right size. The cables have to come back clean and unmarked. Any postage costs involved needs to be paid for by the buyer.